RODE NTG2 Shotgun Microphone
RODE NTG2 Shotgun Microphone
80 DT / Day (ex VAT)
Capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG2 shotgun microphone. With low handling noise, the ability to endure loud sound sources before distortion, and support for battery or phantom power, the NTG2 offers a versatile, cost-effective solution for recording clean dialogue and sound effects.The NTG2’s elevated sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG2 delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing selectable low-cut filter. The durable and lightweight high-grade aluminum housing is finished in hard-wearing epoxy paint to withstand the stress of location recording.
- For Indie Films, TV & Documentaries
- AA Battery or Phantom Powered
- Selectable 80 Hz Low-Cut Filter
- Low Handling Noise
- High Maximum SPL Before Distortion
- Slight Presence Boost
- Windscreen Reduces Wind Noise
- Lightweight Metal Housing
Specs
RODE NTG2 Specs
| Form Factor | Stand/Boom Mount |
| Sound Field | Mono |
| Operating Principle | Line Gradient |
| Capsule | Condenser |
| Diaphragm | 0.5″ / 12.70 mm |
| Polar Pattern | Supercardioid |
| Orientation | End Address |
| Circuitry | Solid-State (JFET) |
| Pad | None |
| High-Pass Filter | 80 Hz, 12 dB/Octave |
| Tone Adjustment | None |
| Gain Adjustment | None |
| Indicators | None |
| On-Board Controls | High-Pass Filter |
| Windscreen | Foam (Included) |
| Frequency Range | 20 Hz to 20 kHz |
| Maximum SPL | 131 dB SPL (1 kHz, 1% THD, 1-Kilohm Load) |
| Off-Axis Rejection | 14 dB at 60°16 dB at 120°12 dB at 180° |
| Impedance | 250 Ohms (Phantom Power)350 Ohms (Battery Power) |
| Sensitivity | -36 dBV/Pa at 1 kHz |
| Output Level | 6.9 mV (Max) |
| Dynamic Range | 113 dB |
| Signal-to-Noise Ratio | 76 dB A-Weighted (1 kHz) |
| Equivalent Noise Level | 18 dB A-Weighted |
| Output Connectors (Analog) | 1 x XLR 3-Pin |
| Headphone Connector | None |
| Operating Voltage | 48 V (Phantom Power)1.5 V (Battery Power) |
| Operating Current Consumption | 2 mA (Phantom Power)0.18 mA (Battery Power) |
| Battery Type | 1 x AA (Not Included) |
| Color | Black |
| Mounting | Mic Clip/Stand Adapter (with Included Hardware) |
| Mounting Thread Size | 5/8″-27 Female (3/8″-16 Female with Included Adapter) |
| Included Case | Soft Case |
| Construction Material | Aluminum |
| Dimensions | ø: 0.87 x L: 11.02″ / ø: 22 x L: 280 mm |
| Weight | 5.68 oz / 161 g (Microphone) |
