Elinchrom ELC Pro HD 500 Flash Head (Hi-Sync)

150 DT / Day (ex VAT)

The ELC Pro HD 500 Flash Head from Elinchrom is evidence of the company’s continued commitment to pushing the envelope in monolight design. Elinchrom has packed the ELC Pro HD 500 with professional features we’ve come to expect from a flash head of this caliber and added quite a bit more. Short recycling times coupled with fast flash durations make freeze-motion, stop-action shooting possible. In fact, up to 20 frames per second is possible at minimum power. An intelligent low noise, temperature-activated fan keeps the head cool and lengthens the life of both the flash tube and modeling lamp. A pre-flash detector lets you integrate your on-camera flash into your studio system.

Keys Features
Specs

500Ws
Recycling Full Power: 0.7 sec @ 115 VAC
Seven Stop Flash Variability
90-265 VAC, 50/60Hz
Integrated 8-Channel Transceiver
Sequence, Delay, and Strobo Modes
Temperature Controlled Fan Cooling
300W Modeling Lamp
Up to 20 fps at Minimum Power
Includes Reflector

Specs

Elinchrom ELC Pro HD 500 Specs

Flash Head

Maximum Power	7 to 500 Ws
Power Control	7 Stops in 1/10-Stop Increments
Guide Number	212.6′ / 64.8 m at 3.3′ / 1 m, ISO 100
Flash Duration	t.5: 1/2940 to 1/2330 Sec
Recycle Time	0.6 to 2.0 Sec
Color Temperature	5500K
Flash Ready Indicator	Audio, Visual
Reflector	Changeable
Accessory Fitting Type	Elinchrom Umbrella Shaft

Modeling Light

Type	Tungsten
Wattage	300 W
Control Modes	Free Set, Full On, Proportional

Sync

Sync Type	Infrared, Optical, Radio
Built-In Wireless Receiver	Yes
Wireless Channels / Groups	8 / 4
System Connection	Barrel 3.5 mm PC Sync
Sync Voltage	5 V

Power

AC Input Power	90 to 265 VAC, 50 / 60 Hz
Circuit Protection	Fuse

General

Display	None
Mount	5/8″ / 16 mm Receptacle
Auto Dump	Yes
Fan Cooled	Yes
Dimensions	H: 8.2 x W: 5.5 x L: 12.4″ / H: 21.0 x W: 14.0 x L: 31.5 cm, Including Cap
Weight	5.18 lb / 2.35 kg